Metal Stamping Capabilities
Press Room
| (1) BLISS. SC2, 400 TON, straight side, double crank, 12” stroke, 96” L.R. x 48” F.B. bed. 17” shut height, air clutch, variable speed drive 35-73 spm., autofeed. Programmable controlled die protection system and Rowe Servo roll feed, 30” windows. |
| (1) DANLY, H-2, 400 TON, straight side, double crank, 8” stroke, 84 L.R. x 48” F.B. bed area., 27” shut height, air clutch variable speed drive 20-60 spm. Programmable controlled die protection system and Rowe Servo roll feed, 35” windows. |
| (1) NIAGARA, BP-2-2-300-0-36, 300 TON, straight side, double crank. 8” stroke, bed & ram area 60” L.R. x 36” F.B., air clutch, brake, counter balance, variable speed drive, shut height 42” .24” windows. Dallas Air feed & straightener 13” wide. |
| (1) NIAGARA, BP-2-200-60-36, 200 TON, straight side, double crank, single greased, air clutch, 60” x 36” bed area, 10” stroke 22” shut height & cushion, with variable speed drive. 18” windows. Dallas air feed & straightener 13” wide. |
| (1) NIAGARA, SC2-150-72-36, 150 TON, straight side, double crank, single geared, air clutch, 72” x 36” bed area, 6” stroke, 25” shut height. 24” windows. Servo Max air feed 24” wide. |
| (1) DANLY SC2-150-60-36, 150TON cap., 9” stroke slide, 24” shut height, 25-50 spm, 3” slide adj., 20” window, 60” x 36” bolster, load monitor |
| (1) NIAGARA BP2-150-72-36, 150 TON STRAIGHT SIDE PRESS, 8” stroke, 23” shut height, 9” slide adj. 72” x 36” bed, 72” x 36” slide, 50-100 spm, 16” window |
| (1) BLISS, 28-1/2, 125 TON, OBI, 27”x 37” bed area, 8” stroke, air clutch, 15-1/2” shut height |
| (1) MINSTER, 70-5/12, 113 TON, open-back, gap frame, geared air friction clutch, 47” x 32” bed area, 6” stroke, 15” shut height |
| (2) NIAGARA, M110, 110 TON, OBI, geared, air clutch 42” x 27” bed area, 8” stroke, 18-3/8 shut height. |
| (1) NIAGARA AF5-1/2, 110 TON, 8” stroke, 16-1/4” shut height, 5” adj., bed area 42 x 27 ram area 18 x 21-3/8, 38 stroke per minute |
| (1) STAMTEC GI-110S, 110 METRIC TONS/121 SHORT TONS, gap frame, air clutch. 30-60 spm. 13.8 shut height 25.59” x 23.2” slide. 45.28” x 23.62” holster, load monitor 18” SERVOMAX II feed |
| (1) MINSTER, 106 TON, gap frame, 7” stroke, 3-1/2” adj., single geared, air clutch, bed area (L—R) 44” x (F-B) 28” |
| (1) PARTSMASTER SS2-105, 105 TON CAP., 5” stroke, 4” slide adj., 38” x 32” bolster, 6” PETERSON scrap chopper |
| (1) FEDERAL, 80 TON, OBI, 10” stroke, air clutch, 60” L.R. x 30” F.B. bed area, 20” shut height |
| (1) BLISS, 23, 75 TON, OBI, 20” X 30” bed area, 6” stroke, air clutch, 19-1/2” shut height |
| (1) MINSTER, #7, 75 TON, OBI, 36” x 24” bed area, 6” stroke, air clutch, 16” shut height |
| (1) MINSTER, #7, 71 TON, OBI, 13” x 16.5” bed area, 3” stroke, air clutch, 90 stroke per min., auto feed, with variable speed drive |
| (1) MINSTER, 6F, 60 TON, OBI, air clutch, 34” x 21” bed area, 4” stroke, 13” shut height with variable drive speed |
| (2) BLISS, C60, 60 TON, OBI, 32” L.R. X 20” F.B. bed area, air clutch, 14-1/2” shut height |
| (1) BLISS, 3-1/2 A. Double Action Draw Press, plunger 80 TON, blankholder 54 TON, bed area 25” x 26” stroke: plunger 14”, blankholder 8”: air clutch, draw capacity 6” |
| (1) BLISS, 1/12 B, Double Action Draw Press, plunger 52 TON, blankholder 35 TON, bed area 20” x 21” stroke: plunger 8”, blankholder 6-1/2, shut height: plunger 16”, blankholder 12” |
| 3) NIAGARA, M45, 45 TON, OBI, air clutch, 25” x 18” bed area, up to 5” stroke, 15-1/2” shut height, with variable speed drives |
| (2) BLISS, C35, 35 TON, OBI, air clutch, 26’ 2” x 17-1/2” bed area. 4” stroke, 10-3/4” shut height |
| (4) NIAGARA, A35, 35 TON, OBI, air clutch 24” x 15” bed area, up to 4” stroke, 14” shut height |
| (2) NIAGARA, M35, 35 TON, OBI, air clutch, 24” 15” bed area, up to 4” stroke, 9” shut height, with variable speed drive |
| (3) MINSTER, 4F, 32 TON, OBI, air clutch, 26” x 15” bed area, up to 4” stroke, 10 shut height, with variable speed drive |
| (1) TORC PAC PRESS, 32TON CAP, 10” shut height, 85-170 stroke/min., 3” slide stroke, 24” x 15” bolster |
| (1) BLISS, 20C 30TON, OBI mechanical clutch, 26” x 18” bed area, 4” stroke, 9-12” shut height |
| (1) BLISS. 19-1/2B, 22 TON, OBI, mechanical clutch, 24” x 14” bed area, 2-1/2” stroke, 8-1/4” shut height |
| (1) BLISS, 19 15 TON, OBI, mechanical clutch,17-1/2” x 10” bed area, up to 2” stroke, up to 9” shut height |
| (1) NIAGARA, A1-1/4, 5-1/2” TON, OBI, mechanical clutch, 10” x 10” x 6-1/2” bed area, up to 2” stroke, 6” shut height |
| (2) WATERBURY-FARELL, shell cutting & trimming machines |
| (1) COOPER WEYMOUTH SMX 12 SERVOMAX coil handling equipment with 12” capacity |
| (1) BLISS, C22, 22 TON, OBI, air clutch, 14-1/2″ x 23-1/2″ bed area, 1-3/4″ stroke, 10″ shut height |
| (3) BLISS, 19 15 TON, OBI, mechanical clutch, 17-1/2″ x 10″ bed area, up to 2″ stroke, up to 9″ shut height |
| (2) NIAGARA, A1-3/4, 11 TON, OBI, mechanical clutch, 9″ x 14″ bed area, 1-3/8″ stroke, 8″ shut height |
| (5) NIAGARA, A1-1/4, 5-1/2″ TON, OBI, mechanical clutch, 10″ x 10″ x 6-1/2″ bed area, up to 2″ stroke, 6″ shut heighT |
| (1) V+O SUPER PRESS SPM 60-120, -15 TON CAP. 1 1/2 STROKE INCHES, 2″ SLIDE ADJ |
| (2) WATERBURY-FARELL, shell cutting & trimming machines |
| (1) COOPER WEYMOUTH SMX 12 SERVOMAX coil handling equipment with 12″ capacity |
| (1) COOPER WEYMOUTH SMX-SE 12 SERVOMAX coil coil feeder with 12″ capacity |
| ALL AUTOMATIC PRESS EQUIPMENT WITH DTE PROTECTION DEVICES MANY OF THE PRESSES HAVE AIR CUSHIONS FOR DRAWING OR FORMING |
| (1) V&O PRESS CO INC. 15 TON PRESS 1 1/2" STROKE |
| (1) PERFECTO DRIVE ROLL FEED, 24″ X .032 CAPACI |
Press Room Feeding and Allied Equipment
| (1) ROWE, 7500 LB. capacity model 7530 DS/L motorized automatic centering reel |
| (1) ROWE, Precision Servo Drive Roll Feeds to 40″ Wide x 120 capacity |
| (1) ROWE, Precision Servo Drive Roll Feed to 20″ Wide x 120 capacity II- U.S. SLIDE FEEDS all sizes, capacity up to 14″ feed length by 14″ wide with roll straighteners, and anti- backup locks |
| (1) DALLAS AIR FEEDS, air operated, heavy duty, for material up to .250″ thickness x 36″ wide X 30″ feed length |
| (1) DALLAS AIR FEEDS, air operated, heavy duty, for material up to .250″ thickness x 18″ wide x 24″ feed length |
| (2) DALLAS COIL FEED LINES, cradle; straightener 20,000# coils: 18″ x 24″ feed: 5/16″ material |
| (2) AIR FEEDS, air operated U.S. Cooper-Weymouth, and coilmatic, capacity 16″ wide to 24″ long with multiple stroke sequence counters, for longer length |
| (1) JAYBIRD AIR FEED, model 51530303, feeds to 30″ W x 30″ stroke |
| (1) AUTOMATIC FEED CO., stock reel 12,000# capacity x 30″ wide |
| (2) SCRAP CHOPPERS, heavy duty, capacity to 12″ wide |
| (2) P/A INDUSTRIES, Model A-4″ wide air feed |
| (1) P/A INDUSTRIES, Model F-6 6″ wide air feed |
| (10) AIR FEEDS, capacity from 12″ widths |
| (3) ROWE FEEDERS straightener, capacity to 36″ wide with double clutch and variable feed length selector |
| (41) ELECTRONIC DIE SAFETY CONTROLS, manufactured by Clarkton, Arctrol, Wintriss and Link |
| (1) COILMATIC COIL CRADLE, heavy duty, with end peeler, deflector, and power pinch rolls, for coils to 6000#, 12″ wide x 60″ OD |
| (11) COIL CRADLES, varying capacities to 12,0001b X 40″ wide |
| (21) COIL REELS, capacity 1000# to 6000#, to 36″ wide, most motorized |
| (9) ROLL STRAIGHTENERS, capacity to 36″ wide stock |
| (2) ROWE, combination coil cradle and roll straighteners, heavy duty, capacity to 8000# x 18″ wide x. 0250 |
| (2) SMALL PARTS STRAIGHTENERS, 17 rolls for extreme flatness |
| (30) ELECTRONIC LOOP CONTROLS |
| (1) DIACRO ROLL FORMER, power driven |
| (3) PRESS UNLOADERS, BMC100, 4′ wide 10″ trays |